um3mqx.netlify.com

C Vacuum Channel

E Sealing Strip

Place Bag on Sealing Strip

Press and Release Lid

1.

Cut enough bag material from roll to hold item

4.

Press down firmly on lid and hold. The motor

to be vacuum packaged, plus 3 inches. Be sure

will turn on as the bag is sealing.

to cut straight.

5.

When motor turns off, release lid. Press

2.

Open appliance lid and place one open end

Open/Cancel Button (B) to open lid.

of cut piece on Sealing Strip (E), not over

6.

Open lid and remove bag. Land of nod geodome user's manual download.

rubber gasket (F).

Now you are ready to vacuum package with your

3.

Close lid.

new bag (see below).

How to Vacuum Package with FoodSaver Bags

Rolls

&

Place Bag in Vacuum Channel

Press and Release Lid

1.

Place item(s) in bag, allowing at least 3 inches of

5. When motor turns off, release lid. The vacuum

space between bag contents and top of bag.

process is complete. Press Open/Cancel Button

2.

Open appliance lid and place open end of bag

(B) to open lid.

down into Vacuum Channel (C).

6. Open lid and remove bag. Refrigerate or freeze if

3.

Close lid.

needed. (See FoodSaver Reference Guide for food

4.

To begin vacuum process, press down firmly on

safety tips.)

lid and hold. The motor will turn on as vacuum

Note: Let appliance cool down for 20 seconds

process begins.

each time.

Bags

1.

Always leave at least one inch of space between

4.

For accessories with a large knob on lid, turn knob

contents and rim.

to Vacuum. Vacuum package using instructions

2.

Wipe rim of canister, container or bottle to ensure

below. When vacuum process is complete, turn

it is clean and dry.

knob to Closed before removing Accessory Hose.

3.

Place lid on canister or container, or place stopper

5.

For accessories without a large knob on lid,

in bottle.

vacuum package using instructions below.

Insert Accessory Hose

Press and Release Lid

1.

Prepare container according to FoodSaver

5. Gently twist and remove Accessory Hose from

Accessory Guidelines above.

accessory and appliance.

2.

Insert one end of Accessory Hose (D) into

6. To test vacuum, simply tug on accessory lid. It

Accessory Port (A) on appliance. Insert other end

Samsung bluetooth headset hm1300 user manual. Visit Samsung today to learn about Headphones & Headsets. This site uses cookies to enhance your web site experience. By continuing to browse. View and Download Samsung HM-1300 user manual online. User Manual Ver.1.1 (English, Spanish(north America)). HM-1300 Headsets pdf manual download. Pairing and connecting the headset with a phone. 1 Enter Pairing mode (The blue indicator light stays lit and stays for 3 minutes). With the headset turned on, press and hold the Talk button for 3 seconds. Activate the Bluetooth feature on your phone and search for the headset (see your. Phone’s user manual).

should not move.

into port on accessory. Twist gray tab while

Tip: If appliance lid is locked, press Open/Cancel

inserting to ensure a tight fit.

Button (B) to open lid.

3. To begin vacuum process, press down firmly

on lid and hold. Motor will turn on as vacuum

Note: For important tips on using accessories with

process begins.

different foods, please refer to the FoodSaver

Accessories

4.

When motor turns off, release lid. Vacuum process

Reference Guide.

If appliance lid is locked, press Open/Cancel Button

Open/Cancel Button can also be used to cancel

(B) to open lid.

vacuum process mid-way and open lid.

Make sure you’ve placed the bag in the proper

excess liquids. Just be sure to leave at least 3 inches

place. When making a bag from a roll, make sure end

between paper towel and end of bag so that bag

of cut piece is on Sealing Strip (E), not over rubber

seals properly with paper towel inside.

gasket (F) or in Vacuum Channel (C).

Make sure you give appliance time to cool down.

Prevent moisture or liquid from being pulled into

Wait at least 20 seconds between seals. Under very

the Vacuum Channel or trapped in the seal. Either

heavy usage, appliance will shut off automatically to

pre-freeze moist foods such as raw meat for 1-2

prevent overheating. If it does, wait 20 minutes to

hours before vacuum packaging, or place a folded

allow appliance to cool off.

paper towel between food and end of bag to absorb

Make sure you’ve placed the bag in the proper

If motor runs for more than 30 seconds without

place. When vacuuming and sealing a bag, make sure

stopping, you may need to adjust bag and try again. If

open end of bag is inside Vacuum Channel (C).

you are making the initial seal on a piece of bag material

Check for wrinkles in the bag along the Sealing

with two open ends, make sure bag is placed on Sealing

Strip, not on rubber gasket (F). If you are vacuum

Strip. Wrinkles in seal may cause leakage and allow

packaging with a bag, make sure open end is placed

air to come back into bag. Check for wrinkles in bag

down inside Vacuum Channel and make sure Accessory

along Sealing Strip (E) before closing lid and vacuum

Hose (D) is not attached. If you are vacuum packaging

packaging. If you find wrinkles after sealing bag,

with an accessory, check Accessory Hose in appliance

simply cut bag open and vacuum package again.

lid and in accessory to ensure a tight fit.

More

First Printing: 6/2004

Item # T18-0170 (06/04)

And